Nous sommes le 28 Mar 2024, 12:09

Heures au format UTC




Poster un nouveau sujet Répondre au sujet  [ 6 messages ] 
Auteur Message
 Sujet du message: Battens...
MessagePosté: 09 Aoû 2018, 07:27 
Hors ligne
Avatar de l’utilisateur

Inscription: 15 Fév 2006, 15:15
Messages: 1223
How do they impact on the sail work?
What does it change if, for given specs, you use different material or stiffness?
What if you change tip, tube or road length?

Trying to figure out if tweaking with battens is a legend or true pros (functional) stuff.


Haut
 Profil  
 
 Sujet du message: Re: Battens...
MessagePosté: 09 Aoû 2018, 08:44 
Hors ligne

Inscription: 30 Juin 2015, 07:24
Messages: 321
Localisation: Sur l'eau
I had recently a clinic with Pieter and learned a lot.
You can watch this video from him ...
https://www.youtube.com/watch?v=ryTGwciq80s

i know he does carbon battens specifically for pwa riders... so you might get more info from him directly.
http://pieterbijlwindsurfing.com/concep ... e-for-you/

Enjoy :)


Haut
 Profil  
 
 Sujet du message: Re: Battens...
MessagePosté: 09 Aoû 2018, 15:48 
Hors ligne
Avatar de l’utilisateur

Inscription: 31 Déc 2006, 10:42
Messages: 89
Localisation: st medard en jalles 33
Hi giu I'm not a competitor and even with my poor level the main changes is the utilisation of carbon batten I mean real car on.I've used an ex challenger sail of Anders Bringdal and what a surprise when I broked one of them the sail has never the same feeling after the replacement even in the high wind than in the light
wind...

_________________
un ti punch ca va deux ti punch ca va toujours!
Matos FALCON 85- MANTA 68-AB 67 -AB+ 76-FALCON SPEED
GUN GSR 5,6-6,3-7-7,9 VAPOR 5.0 2009
VMAX 36,01Nds Falcon 85 -gun GSR 6,3 Gruissan 16/07/2016


Haut
 Profil  
 
 Sujet du message: Re: Battens...
MessagePosté: 09 Aoû 2018, 20:51 
Hors ligne
Avatar de l’utilisateur

Inscription: 15 Fév 2006, 15:15
Messages: 1223
Yeah, I know the pro battens system from PB and I can easily imagine that some replacement will change the sail feeling.
I’m trying to start a thread where the basic rules regarding the battens can be written and which whom people can experiment on his own if he likes.
I guess the (very) few knowing the argument won’t really get in, but...


Haut
 Profil  
 
 Sujet du message: Re: Battens...
MessagePosté: 09 Aoû 2018, 21:20 
Hors ligne
Avatar de l’utilisateur

Inscription: 12 Fév 2006, 23:38
Messages: 8135
Localisation: Alsace + Limousin
On my previous V8 2005, I made an upgrade of the std battens with battens from old racing sails.
Stiffness of the rear part was higher, and control when overpowered was better.
Battens are expensive regarding other componnents of sails, it's a good idea to save good battens from old sails before trashbox ;)

_________________
Matos lac et vent faible, 100% foil même si je pourrais compléter avec une freeride 115 litres pour le fort et une wing pour le très très light.
Flotteurs : IQFoil / Slant 133 / ex-proto Horue Flikka
Foils : SB Team Set + IQ
Voiles : freeraces 2 - 3 cam de 5.9 à 9.0
1.86 m - 100 kg


Haut
 Profil  
 
 Sujet du message: Re: Battens...
MessagePosté: 10 Aoû 2018, 00:50 
Hors ligne
Avatar de l’utilisateur

Inscription: 27 Fév 2008, 08:54
Messages: 797
Localisation: Anse Vata
After a lot of trials, for my part i experienced that if you want that your sails works in each way you have to find the same stiffness than the original
The cheapest carbon pultruded tubes are too stiff, even if you reduce by 4 mm the section
roll wrap tube is more flexible but you can rely to the dealer indication, you have to buy and compare the stiffness


Haut
 Profil  
 
Afficher les messages postés depuis:  Trier par  
Poster un nouveau sujet Répondre au sujet  [ 6 messages ] 

Heures au format UTC


Qui est en ligne

Utilisateurs parcourant ce forum: Majestic-12 [Bot] et 9 invités


Vous ne pouvez pas poster de nouveaux sujets
Vous ne pouvez pas répondre aux sujets
Vous ne pouvez pas éditer vos messages
Vous ne pouvez pas supprimer vos messages

Rechercher:
Aller à:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Traduction par: phpBB-fr.com