Un petit lien pour ceux qui utilisent leur formula ...... en 10 m avec plus de 20 noeuds de vent ... truc impossible a lire certain commentaire ici et la ... et aussi quelques infos sur la ( les ) taille ( s ) d'ailerons
Morceaux choisi :
To go fast at 120 degrees, you require a decent sized FW fin of
no less than 66cm. Shorter fins (especially now that the tail width on most modern formula boards is +82cm) will make the board unstable and most likely give you spin-out problems.
Quand j'entends parler de 52 d'aileron je trouve ça drole
Generally speaking, FW speed records will be most likely
set in +25 knot winds so most sailors will be already down on their smaller rigs.
It is my opinion that 9m sails will be difficult to achieve speeds over 30 knots with and those who have achieved this feat would have been faster on 10m sails.
A 10m/11m sail will generate the required power to help rail the board, provided the fin is compatible and also working with the overall tuning of the equipment.
powerful sail (10m/11m recommended)
small fin
(+66cm at least, but powerful enough to help rail the board)
lot’s of wind (+25 knots mandatory)
relatively flat water with small, close together chop (we’ll get to this in a minute)
balls of steel!
Je rajouterai
Fat boy fat
http://www.carbonsugar.com/technique/ho ... fw-kit-go/
No comment
Connexion
M’enregistrer
FAQ
Rechercher
